Be ready to replace the waste toner box. See Replacing the waste toner box on page Check Paper Size Reload correct paper. The paper in the tray is not the correct size.
|Published (Last):||25 March 2004|
|PDF File Size:||13.56 Mb|
|ePub File Size:||14.17 Mb|
|Price:||Free* [*Free Regsitration Required]|
Be ready to replace the waste toner box. See Replacing the waste toner box on page Check Paper Size Reload correct paper. The paper in the tray is not the correct size. See Paper size on page 20,Tray use in copy mode on page 21,Tray use in print mode on page Cooling Down Wait for a whileThe temperature of the drum unit or toner cartridge is too hot.
The machine will pause its current print job and go into cooling down mode. During the cooling down mode, you will hear the cooling fan running while the LCD shows Cooling Down, and Wait for a while.
Make sure that you can hear the fan in the machine spinning and that the exhaust outlet isnt blocked. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning follow the suggestions below.
Turn off the machines power switch and then turn it on again. If the error message continues leave the machine for several minutes and then try it again. Cover is Open Close the Front Cover.
The front cover is not closed completely. Close the front cover of the machine. Cover is Open Close the Back Cover. The back cover is not closed completely. Close the back cover of the machine. Document JamThe document was not inserted or fed properly, or the document scanned from the ADF was too long. Drum ErrorThe corona wires on the drum unit need to be cleaned. Clean the four corona wires on the drum unit. See Cleaning the corona wires on page EL ErrorThe machine has a mechanical problem.
Open the front cover and close it again. Fuser ErrorThe temperature of fuser unit does not rise at a specified temperature within specified time. Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. The fuser unit is too hot. Error MessageCauseAction.
Brother DCP-9045CDN Quick Setup Manual
With print resolutions as much as x dpi, your documents, images, and graphics will look sharp and vibrant, with crisp, tidy text, at approximately 21 ppm. With automatic duplexing, you can send your work to the printer, and also go on to your next job. Colour graphics are likewise excellent and while being brilliant enough to attract attention are not so dazzling regarding look gaudy. Check shade files at x dpi resolution, as well as share the digitized picture with various other users on the network. Executing high-grade shade scans or generating up to 21 shade web pages per minute with its printer. A character by five-line, backlit LCD show programs a lot of condition info, though it utilizes a surprisingly hideous, crude typeface. To the right of this is a set of navigating switches as well as, better power, a number pad as well as the required three buttons to start as well as stop jobs.
Brother DCP 9045CDN User Manual
Brother DCP-9045CDN Benutzerhandbuch
Brother dcp-9045cdn User Manual