Overview: Channel Modes and Network The power amplifier shall provide two channels of amplification. A rear-panel switch shall bridge the two channels for increased power output through a single channel. The amplifier shall employ a proprietary tracking Class D output circuit topology. The amplifier shall be equipped with sensing and communication circuits to allow comprehensive remote control and monitoring functions via a sepa- rate network bridge. Power Output and Performance Maximum total output of both channels shall be watts. Each amplifier channel separately shall deliver maximum continu- ous output power as follows: watts into 16 ohms, watts into 8 ohms; watts into 4 ohms; or watts into 2 ohms.
|Country:||Trinidad & Tobago|
|Published (Last):||20 September 2012|
|PDF File Size:||4.7 Mb|
|ePub File Size:||7.77 Mb|
|Price:||Free* [*Free Regsitration Required]|
SMPS power remains constant even with significant drops in the mains voltage. SMPS , which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage.
A highly refined and updated circuit layout optimizes the interaction of R. To keep its cool under extreme demands, the FP relies on Lab. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP delivers Lab. Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.
The comprehensive warning and protection features on the FP safeguard output circuits and connected loads while also extending amplifier life and minimizing the chance of service inter- ruptions.
Automatic protection measures engage only at critical thresholds. Operating conditions are re-checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal. The FP is shipped with a NomadLink network interface as standard.
Lab.gruppen FP 13000 Technical Data
Lab.gruppen FP+ Series FP 13000 Manuals